Specifying input parameters
Syntax
Options
Table 2-60. VOLUME DBCS parameter options and definitions
Option
YES
NO
Default
Syntax
Options
Table 2-61. VOLUME EMTYPE parameter options and definitions
Option
T1
T2
Default
VOLUME EMTYPE
parameter: point
to note
2-58
VOLUME DBCS = {YES | NO}
Definition
Allows printing of a data stream of intermixed single-byte and double-byte
characters.
Allows printing only of single-byte characters.
NO
VOLUME EMTYPE
Specifies the emulation type with which the system will print text.
VOLUME EMTYPE = {T1 | T2 }
Definition
Interprets the function codes and the specified print positions, using the
existing compatible formats.
Interprets function codes and the specified print positions using the format for
the host computer.
YES
This parameter is ignored for online printing unless one of the
following VOLUME HOST parameter options for online printing is
specified:
•
HOST=FUJITSU; FUJONL KANJI=YES
•
HOST=HITACHI; HITONL KANJI=YES
VOLUME EOV
Specifies the action the system takes when it encounters an end
of volume (EOV) on the input data tape.
Using LCDS Print Description Language