File Djde - Xerox DocuPrint 100 Software Manual

Using Dynamic Job Descriptor Entries (DJDEs)
Options
Option
offset
termination

FILE DJDE

Type
Syntax
Options
Option
filename
filetype
f
s
5-28
Table 5-22. GDATA DJDE options and definitions
Definition
The starting point within the record of the file data that will be downloaded.
The terminating byte of the record. The options are:
• DEFAULT
– If online, a single terminating byte exists.
– If offline, no terminating byte exists.
• n: The number of terminating bytes that exist
Enables you to load files to the system disks while a print job is in
progress. The print job may be invoked solely for the purpose of
downloading permanent files. (Although intended primarily for
use with online systems, this DJDE is not restricted to online
use.)
Record oriented
FILE = ([filename] [[, filetype] [[, f] [[, s] [[, n]]]])
Table 5-23. FILE DJDE options and definitions
Definition
A 1 to 6 character name used to identify the downloading file.
In this option, lowercase characters a through z are converted to
uppercase before use.
A 3 character file extension identifier, indicating the type of file being
downloaded.
In this option, lowercase characters a through z are converted to
uppercase before use.
File input format parameter. The only parameter that is supported for the
DP 2000 Series EPS is as follows:
L = LPS labeled tape format
The default file input format is L.
One of the following file storage parameters:
• D = Delete after report printed
• P = Permanent
The default file storage is P.
Using LCDS Print Description Language