Number Djde: Point To Note - Xerox DocuPrint 100 Software Manual

Using Dynamic Job Descriptor Entries (DJDEs)
Options
Option
pnum
lnum
cnum
findex
inkref
NO
5-56
Table 5-46. NUMBER DJDE options and definitions
Definition
page number
An integer that specifies the starting page number. The maximum page
number that can be printed is 2,147,483,647.
line number
An integer that specifies the number of the line on which the page number is
placed
column number
An integer that specifies the final column (character space) number for the
page numbering sequence
font index
This is an index into the list of fonts specified in the currently active FONTS
parameter of the PDE command, or of a recent DJDE. The index is an integer
starting with 1 for the first font.
If an index is not specified, the first font in the list is used.
ink reference
Specifies the reference number for the ink with which the page number will be
printed.
Specifies that there will be no page numbering.

NUMBER DJDE: point to note

• The beginning page number may be nonpositive, in which
case it is incriminated at page transitions but is not printed
until it is positive.
• If the system encounters a NUMBER DJDE immediately after
the criteria that were specified for the RSTACK command
were met in the input data stream, page numbering starts on
the next page (after the delimiter sheet) and with the page
number 1 printed on it. (Refer to the examples in the following
figure.)
Using LCDS Print Description Language