Line Inkindex - Xerox DocuPrint 100 Software Manual

Options
Table 4-31. LINE GDATA parameter options and definitions
Option
offset
termination
Default
Syntax
Options
Table 4-32. LINE INKINDEX parameter options and definitions
Option
offset
initval
bitopt
NONE
Default
Using LCDS Print Description Language
Definition
The starting point of the graphic data.
The terminating byte of the record. The options are:
• DEFAULT
– If online, a single terminating byte exists.
– If offline, no terminating byte exists.
• n: The number of terminating bytes that exist
offset: 0
termination: DEFAULT

LINE INKINDEX

Specifies a field within a data record that contains a number that
represents the ink index in the current ILIST.
LINE INKINDEX = {offset | (offset [, initval [, bitopt]]) | NONE}
Definition
Indicates the byte offset in the data record where the ink index number is
located.
initial value.
Specifies an index value that is associated with the first ink in the ink list. Must
be ONE or ZERO.
• "ZERO" specifies that the first ink on the ink list is considered "ink 0."
• "ONE" indicates that the first ink on the ink list is considered "ink 1."
The default initval is ONE.
bit option
Specifies the number of bits that should be used in calculating the ink index.
The range is 1 through 7.
The default bitopt value is 4.
Specifies that there is no ink index.
NONE
Specifying print format parameters
4-29