Xerox DocuPrint 100 Software Manual page 477

HCS
hexadecimal
HFDL
hierarchy
HIP
host
host interface
hpos
id
IFU
IG
IGM
image area
initialize
input/output
interface
interpolation
Interpress
Interpress font
utility (IFU)
program
Using LCDS Print Description Language
high-capacity stacker. Stacker bin capable of holding 2500
sheets of 20 pound/75 gsm paper. In the LPS, the high-capacity
stacker bins are located in the top half of the feeder/stacker
modules.
Numbering system with a base of 16. In this system, 10 through
15 are represented by A through F, respectively.
host forms description language
Relative priority assigned to arithmetic or logical operations that
must be performed.
Host Interface Processor
Computer accessed by users which serves as a source of high-
speed data processing for workstations with less computer
power.
Connection between network and host computer.
horizontal positioning
identifier. Character used to identify or name data and possibly
to indicate certain properties of that data.
Interpress font utility
image generator
image generator module
Area on a physical page that may contain text or graphics.
1. To prepare the magnetic surface of a blank diskette so that it
can accept data. 2. To set all information in a computer system
to its starting values (usually the first step is accomplished when
a program is booted).
General term encompassing the flow of data into and out of a
system.
Device by which two systems connect and communicate with
each other.
Series of logical rules implemented in the printer to convert a 300
spi input video stream to a 600 spi output video stream.
Interpolation is functionally analogous to bit doubling (2x
scaling), except the logical rules result in superior output.
Xerox standard that defines digital representation of lines for
printing. Interpress documents can be printed on any sufficiently
powerful printer equipped with Interpress print software.
Program used to convert FIS fonts to LPS fonts.
Glossary
Glossary-7