Specifying input parameters
PCC command
Table 2-31. Summary of PCC command parameters
Parameter
ADJUST
CONSTANT
RECORD FORMAT
LENGTH
LMULT
LTHFLD
2-30
KCODE command: point to note
The DBCODE command can be used in the same manner as
KCODE.
Enables you to create a table (or modify an existing standard
table) of one-byte printer carriage control codes and define their
action.
NOTE: This command is ignored by the DP EPS for both
channel and TCP/IP processing. Carriage control (specifications
such as Skip to Channel, Print, or Space 2 Lines) is
accomplished by processing IBM channel commands, which
have specific, well defined carriage control interpretations.
However, if you specify the PCC command in a JSL created on
your system, you can transfer the JSL file to another laser
printing system for use with offline printing.
All line spacing, skipping to channel, and printing actions are
defined through this command.
You can optionally specify an identifier of the ac type (having at
least one alphabetic character) when defining the PCC table,
and reference this identifier in the LINE PCCTYPE parameter.
PCC command parameters
The following table summarizes the PCC command parameters.
Specifies
Defines the printer action for two successive
channel skips
Specifies user-assigned carriage control code
exceptions to the default table.
Selects a table of printer carriage control codes.
Specifies the initial reference point for the first
carriage control command.
Makes inaccessible any unnecessary bits from
the printer carriage control byte.
Length of field containing record length
Online
N
N
N
N
N
Y
Using LCDS Print Description Language
Offline
DJDE
Y
N
Y
N
Y
N
Y
N
Y
N
N
N