Banner Type - Xerox DocuPrint 100 Software Manual

Using logical processing
Options
Table 3-18. BANNER TEST parameter options and definitions
Options
testexp
Default
Syntax
Options
Table 3-19. BANNER TYPE parameter options and definitions
Option
DATA
BANNER
Default

BANNER TYPE

parameter: point
to note
3-26
Definitions
test expression
Refer to "Coding a test expression," earlier in this chapter, for the format and
syntax of a testexp.
If a test expression is satisfied, the page containing the record tested is
considered a banner page.
No default
BANNER TYPE
Specifies the use of selected data pages as banner pages when
reports do not contain this information.
BANNER TYPE = {DATA | BANNER}
Definition
Allows you to specify selected data pages to function as banner pages for
report separation.
This type of banner page is printed with a form (if specified). In duplex mode, it
is printed as a duplex page with data on the back.
If multiple PDE BEGINs and TYPE=DATA parameters are specified, only the
first header page of the report is repositioned to the first logical page of a new
physical sheet.
Specifies that the banner pages will print without forms. In duplex mode, the
banner pages are printed with blank backs.
BANNER
Use DATA when reports do not contain user specified banner
pages. Use BANNER when reports contain user specified
banner pages.
Using LCDS Print Description Language