Message Command - Xerox DocuPrint 100 Software Manual

Specifying print format parameters
Example 3

MESSAGE command

4-38
Figure 4-2. Sample data record structure
LINE PCCTYPE=NONE, DATA=(1,57), VFU=V1;
The MESSAGE command permits you to inform the operator of
special conditions by displaying user defined text on the screen.
• All MESSAGE command parameters must be specified in a
single command. If multiple message commands are
specified, the parameters in the final command are applied.
• The DP EPS systems do not support the bar code option. Bar
code commands that are encountered by the controller are
ignored, and no syntax errors are noted. No messages or
operator information pages are generated.
Using LCDS Print Description Language