Specifying Print Format Parameters; Print Format Command Descriptions - Xerox DocuPrint 100 Software Manual

Print format command descriptions

Command
ABNORMAL
ACCT
CME
IDR
LINE
MESSAGE
OUTPUT
PDE
ROUTE
STOCKSET
VFU
Using LCDS Print Description Language
4.

Specifying print format parameters

To specify the physical characteristics of a print job, define the
placement of data on the page, identify system responses to
error conditions, and other functions related to the printed output,
you use the PDL print format commands. These commands are
described in the following sections.
The following table lists these print format commands and
summarizes their functions. Details of the function, syntax, and
usage of the parameters available for each command are
provided in its command description section.
Table 4-1. Summary of print format commands
Function
Specifies operations security and page offset on jam recovery.
Defines user and system accounting requirements.
Allows certain parts of report output to be replaced on copies with
predefined static data or to specify font changes within variable data.
Defines inks, default ink catalogs, and palettes.
Controls margin, overprinting, carriage control, and so forth.
Sends message to operator during input or output processing.
Controls printing mode, forms, paper size and type, offsetting, and
output destination.
Defines page format (page orientation, fonts).
Sends message and form for a routing page.
Defines a set of stocks used in a report.
Defines vertical format control.
4-1