Xerox DocuPrint 100 Software Manual page 365

Record oriented
DJDEs
DJDE
ASSIGN
BOF
C (text)
DATA
END
EOF
FILE
LOGO
LPI
OVERPRINT
TOF
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)
Record oriented DJDEs take effect immediately at the next
record following the last record of the packet (set) of DJDE
records of which they are a part. After an END parameter, a
compiled record oriented DJDE takes effect immediately.
NOTE: The exception is the OVERPRINT DJDE, which takes
effect at the next logical page boundary if FONTINDEX has been
invoked in a JDE or DJDE.
Record oriented DJDEs also may appear at report boundaries to
change subsequent pages in a report (or report copy).
Table 5-5. Record oriented DJDEs
Function
Assigns a VFU channel to one or more line numbers on the logical page.
Specifies the Bottom of Form (BOF) line number.
Allows comment text in the DJDE record.
Specifies the location and length of printable data within an input record.
Specifies the end of DJDE information.
Stops downloading of a sixel encoded file to the system disk.
Enables files to load onto the system disk while a print job is in progress.
Specifies the name and location of logos that will be printed on pages of a
report.
Specifies the line spacing values for each subsequent line.
Provides instructions to the system for handling overprint lines (print lines
whose carriage control specifies printing with no line spacing after the last
printed line).
Specifies the Top of Form (TOF) line number.
5-13