Kcode Assign; Kcode Default - Xerox DocuPrint 100 Software Manual

Syntax
Options
Table 2-29. KCODE ASSIGN parameter options and definitions
Option
input
output
Default
Syntax
Options
Table 2-30. KCODE DEFAULT parameter options and definitions
Option
codetype
Default
Using LCDS Print Description Language

KCODE ASSIGN

Defines double-byte character code assignment exceptions or
an entire user character translation table.
ac: KCODE ASSIGN = {(input, output) | (input, (output
output ] [,...])}
2
Definition
A numeric constant that defines the input double-byte code.
A numeric constant that defines the output double-byte code that corresponds
to the input code
No default

KCODE DEFAULT

Specifies a base code from which you can make double-byte
character code assignment exceptions.
The base code is specified by a codetype; the exceptions are
specified in the ASSIGN parameter.
ac: KCODE DEFAULT = codetype
Definition
Keyword for one the following double-byte codes:
• IBM: Specifies the IBM Nihongo character set (Kanji double-byte sets)
• JEF: Specifies the Fujitsu JEF Kanji double-byte character set.
• JIS
• KEIS: Specifies the Hitachi KEIS Kanji double-byte character set
No default
Specifying input parameters
[,
1
2-29