Volume Expage - Xerox DocuPrint 100 Software Manual

Syntax
Options
Table 2-62. VOLUME EOV parameter options and definitions
Option
PAUSE
NOPAUSE
EOF
NOEOF
Defaults
Syntax
Using LCDS Print Description Language
VOLUME EOV = ([PAUSE | NOPAUSE], [EOF | NOEOF])
Definition
Displays a message when EOV is encountered. A CONTINUE response by the
operator causes the tape to rewind and the normal volume change sequence to
proceed.
Issues a rewind instruction as soon as the EOV label is processed.
End of file.
Specifies that the end-of-volume label is treated as an end-of-file label. When
this occurs, the first part of the page spanning the volumes is output as the last
page of the job. The second part of the spanned page is printed as the first
page when the next volume is started, with possible page format irregularities.
To use the EOF parameter effectively, special user-formatting of the multireel
tapes is required to avoid these page format problems.
No end of file.
Specifies normal end of volume processing.
NOPAUSE, NOEOF

VOLUME EXPAGE

Enables data error logging and reporting of unprintable
characters that do not have font bitmap or outline data in the font
file. (Errors are flagged on a separate page.)
VOLUME EXPAGE = {YES | NO}
Specifying input parameters
2-59