Supplies; Paper And Other Throughput Stocks; Selecting Paper - Xerox DocuPrint 100 Installation Planning Manual

Paper and other throughput stocks

Selecting paper

Acceptable paper
stocks and sizes
Installation Planning Guide
A. Supplies
This appendix provides information and specifications for media
used with your Xerox DocuPrint 100/115/135/155/180 EPS
printer. Instructions for ordering supplies are also provided.
Consumable supplies (those that are depleted during operation
of the system), such as paper, dry ink, developer, fuser agent,
etc., must be ordered for your printer. It is important that an
adequate supply of these items be on hand for installation, and
that your supply be maintained afterwards.
The success of any print run is greatly dependent on the proper
selection, care, and handling of the stock used.
Select your paper carefully. If you do not use the proper paper,
you increase the probability of paper jams and misfeeds. The
stocks you use must meet the specifications set forth by Xerox
for operability in the printer. For additional information about
paper specifications, refer to Helpful Facts about Paper,
delivered with your printer.
The printer accepts the following standard size cut-sheet papers:
• 7 by 10 inches / 178 by 254 mm (with 7-inch kit option)
• B5: 7.17 by 10.12 inches / 182 by 257 mm (with 7-inch
option)
• US Letter: 8.5 by 11 inches / 216 by 279 mm
• US Legal: 8.5 by 14 inches / 216 by 356 mm
• A4: 8.27 by 11.69 inches / 210 by 297 mm
• B4 (European): 9.84 by 13.89 inches / 250 by 353 mm
• JIS B4 (Japanese): 10.12 by 14.33 inches / 257 by 364 mm
A-1