Xerox DocuPrint 100 Software Manual page 364

Using Dynamic Job Descriptor Entries (DJDEs)
DJDE
ITEXT
JDE
JDL
MAP
MARGIN
MODIFY
NUMBER
OTEXT
PALETTE
PMODE
RFORM
RTEXT
SEFMAP
SHIFT
SF1FUNCTION
SF2FUNCTION
SIDE
STOCKS
TMODE
TRANS
XSHIFT
5-12
Table 5-4. Page oriented DJDEs (Continued)
Function
Specifies a text message that will be displayed to operators during
processing.
Specifies the JDE to be used within the selected JDL at the next page
boundary.
Specifies the name of the JDL to be invoked at the next page boundary.
References a previously created font mapping file.
Specifies the left printing margin within each logical page.
Specifies the CME to be used on each subsequent logical page.
Specifies page numbering control.
Provides a text message to be displayed to the operator during job
printing.
Specifies the palette of inks that will be used for subsequent pages.
Specifies the printing mode for each page (either landscape or portrait).
Specifies whether a form is printed on all RTEXT pages.
Specifies text to be printed on a separate page preceding each report
copy.
Specifies a font mapping table.
Specifies a shift of page image (page content) for binding purposes.
Specifies sheet finisher function number 1 through the DFA channel C6.
Specifies sheet finisher function number 2 through the DFA channel C7.
Specifies the repositioning of the next logical page to the first logical
page position of the given side of a physical sheet of paper.
Redefines the parameters of a STOCKSET command (the types of
stocks to use) for the page.
Specifies process direction measurement for determining default pitch
modes.
Specifies whether transparencies are used in the print job.
Allows shifting in the x direction for short edge binding.
Using LCDS Print Description Language