Djde Descriptions; Alter Djde - Xerox DocuPrint 100 Software Manual

Using Dynamic Job Descriptor Entries (DJDEs)
DJDE
ALTER
BATCH
CANCEL
FDATA
GDATA
GRAPHIC
SAVE

DJDE descriptions

ALTER DJDE

Type
Syntax
5-14
The following table lists record oriented DJDEs that are used
with graphics.
Table 5-6. Record oriented DJDEs for graphics
Function
Specifies the new imaging parameters for graphics.
Delimits Batch mode graphic data to permit normal processing of online banner
pages for Batch mode jobs.
Cancels the hold specified by the H parameter in a GRAPHIC or IMAGE DJDE.
Specifies the offset of the starting point of file data from the beginning of the
user portion of the record.
Specifies the offset of the starting point of graphic data from the beginning of
the user portion of the record.
Specifies that the DJDE is a graphic sentinel.
Specifies that image (.IMG) files that were updated during the current report will
not be purged when processing of the report is complete.
The following sections give the definition, syntax, and options for
each available DJDE.
Specifies new imaging parameters for graphics previously
referenced using the HOLD (automatic reimaging) parameter.
Record oriented graphic
ALTER = (name, vpos [units], hpos [units] [, n [/d]] [, (INK[S],
inkref [, inkref ]...)])
1 2
Using LCDS Print Description Language