Volume Command; Volume Command Parameters - Xerox DocuPrint 100 Software Manual

Specifying input parameters
Example 4
T4: TCODE DEFAULT=EBCDIC,
TASSIGN=(3,('A',–,'I'),('J',–,'R'),('S',–,'Z')),
TASSIGN=(4,('#A',–,'#I'),('#J',–,'#R'),('#S',–,'#Z'));

VOLUME command

Table 2-56. Summary of VOLUME command parameters
Parameter
VOLUME BMULT
VOLUME CODE
VOLUME DBCODE
VOLUME DBCS
VOLUME EMTYPE
VOLUME EOV
VOLUME EXPAGE
VOLUME HOST
2-54
The basic character set is EBCDIC. The editor that was used to
edit the JSL file is limited to uppercase only:
The VOLUME command specifies input medium and data
characteristics.

VOLUME command parameters

The following table summarizes the parameters of the VOLUME
command.
Specifies
Specifies a multiplication factor that is used to
determine the true block length.
Specifies the character code set for input data
translation.
Specifies which double-byte character code
translation table the system will use to
interpret the input data.
Specifies the double-byte character printing
mode. Allows printing of data streams with
intermixed single-byte and double-byte
characters.
Specifies the emulation type with which the
system will print text.
Specifies the action that the system will take
when it detects the end of a tape volume.
Provides data error logging and reporting of
unprintable characters that do not have font
bitmap or outline data in the font file.
Specifies the source of input data that will be
processed.
Online
N
Y
Y
Y
Y
N
Y
Y
Using LCDS Print Description Language
Offline DJDE
Y N
Y N
N N
N N
N N
Y N
N N
Y N