Using Pdl Commands For Graphics - Xerox DocuPrint 100 Software Manual

Table 6-1. OUTPUT command parameters and functions for graphics
Option
OUTPUT GRAPHICS
OUTPUT IMAGE
OUTPUT PURGE
OUTPUT UNITS
Option
ALTER DJDE
BATCH DJDE
CANCEL DJDE
GRAPHIC DJDE
IMAGE DJDE
SAVE DJDE
Using LCDS Print Description Language
6.

Using PDL commands for graphics

Several PDL parameters are available for graphics handling.
These include four OUTPUT command parameters (specified in
the JDE) and six DJDEs. The following tables summarize those
parameters.
Definition
Specifies if and how graphics will be processed in current job.
Specifies initial scaling and positioning parameters for graphics in Batch
mode.
Specifies default disposition of document interleaved graphics at the end
of a report.
Specifies units of measure for positioning graphics.
For a explanation of the OUTPUT command parameters, refer to
the OUTPUT command description, in the "Specifying print
format parameters" chapter.
Table 6-2. DJDE definitions for graphics
Definition
Specifies new imaging parameters for graphics previously referenced using
HOLD statement.
Marks beginning and end of online Batch mode graphic data.
Terminates option of the GRAPHIC DJDE.
Precedes interleaved graphic in data stream.
Specifies name, scaling, and positioning of a graphic printed.
Identifies document interleaved graphics not to be deleted or purged.
6-1