Xerox DocuPrint 100 Software Manual page 71

Using LCDS Print Description Language
• [Output]: Includes sides imaged (1-sided or 2-sided),
finishing, slip sheets, rotation of page image, delivery
(face up or down), order (1 to N or N to 1), output bin
selection (location), collation, and optimization of
throughput speed for jobs containing mixed sizes of stock.
• [Alignment]: Includes unit of measure for the
adjustment, the amount of page image displacement, and
printing a test pattern.
NOTE: The features on the Properties, PostScript/PCL,
ASCII, and LCDS tab windows are not late binding attributes.
The items on the Properties tab, including queue and printer
name, input mode (streaming, spooling, etc.), destination
(print or save), and job notes, must be set prior to job
submission.
The items on the PostScript/PCL, ASCII, and LCDS tab
windows must be set before the job is decomposed. If they
are not specified at that time, the system uses the queue
defaults.
4. On each tab window, select the Override check box for each
queue attribute that you want to override all PDL commands
and DJDEs.
NOTE: If [Override] is not selected for an option on the
window, that option has no effect on the job. Instead, the
parameter default in the JDL and JDE is used. If no JDL is
specified, the system uses the default for the command itself.
The following figure shows the Output tab on a queue
Properties window, on which the [Override] check boxes for
the [Location], [Order], and [Delivery] have been selected.
PDL principles and procedures
1-43