Form[S] Djde; Form[S] Djde: Point To Note - Xerox DocuPrint 100 Software Manual

Using Dynamic Job Descriptor Entries (DJDEs)

FORM[S] DJDE

Type
Syntax
Options
Option
formid
init
copies
NONE
5-38
Specifies the form to be merged onto the printed pages. It takes
effect on the next page boundary. The form specified is invoked
beginning with the specified starting copy number. Multiple
FORMS DJDEs may be used to associate different forms with
different copy plies.
Page oriented
FORM[S] = {NONE | formid | (formid [, init [, copies]]) [, (INKS,
inkref [, inkref ] ...)])}
1 2
NOTE: When using this command, you must enter an entire
parameter: FORM or FORMS. Do not abbreviate to the first three
letters, because system interprets "FOR" as FORMAT.
Table 5-27. FORM[S] DJDE options and definitions
Definition
Specifies a 1 to 6 character form file name (may be numeric, alpha, or
alphanumeric), which exists on the system disk.
If two or more forms are called out in succession, init specifies the first copy
number to which the next form applies. This defaults to the first or next copy. If
the copies parameter is not specified, the last (or only) specified form applies to
all copies beginning with the init copy number.
If the form is not the last one that is specified, copies defaults to 1.
If neither init nor copies is specified, the form applies to all copies of all data
pages of the report.
Specifies the number of copies to which the form applies.
Means that no form is added to the associated report page of variable data.

FORM[S] DJDE: point to note

Because there is ambiguity between the abbreviated forms of
the FORMAT and the FORM[S] DJDEs, if either is abbreviated to
the first three letters, DJDE processing presumes FORMAT.
Using LCDS Print Description Language