Expansion Board Removal - NEC POWERMATE V Service Manual

2. Remove the two cover screws shown in Figure 5-1.
3. Slide the system unit cover toward the front about one inch.
4. Lift the system unit cover up and off (see Figure 5-2).

Expansion Board Removal

Remove any installed expansion board(s) using Figure 5-3 through Figure 5-4 and the
following steps.
1. Remove the system unit cover as previously described.
2. Disconnect any cables leading from the expansion board(s).
Screws
Figure 5-1 System Unit Cover Screws
Figure 5-2 Removing the System Unit Cover
Desktop Repair 5-3