Cd-Rom Reader Connectors And Jumper Settings - NEC POWERMATE V Service Manual

D-2 Quad-Speed CD-ROM Reader Specifications and Jumper Settings
Feature
Supported Formats
General Specifications
Capacity
Physical Format
Logical Format
Laser Pickup
Audio Features
Height
Width
Depth
Weight
Operating Temperature

CD-ROM Reader Connectors and Jumper Settings

The back of the CD-ROM readers provides the following connectors and jumpers:
T
Audio output connector — connects the reader to the system's sound system via
an audio cable.
T
Configuration jumpers — enables or disables the cable select feature, slave device
configuration, or master device configuration. The CD-ROM reader is set as the
master device on the secondary PCI/IDE channel.
Table D-1 CD-ROM Reader Specifications
Quad-Speed Specification
Multisession Photo CD
Single Session Photo CD
540 MB (Mode 1),
630 MB (Mode 2)
Audio disc: red book
Data disc: yellow book
(Mode 1 and Mode 2)
orange book (read-only)
Data disc: ISO 9660
file format
3-beam tracking system
Two channels
Software volume control
44.1 KHz sampling frequency
1.63 in. (41.5 mm)
5.75 in. (146.0 mm)
7.48 in. (190.0 mm)
1.8 lb. (900 grams)
5°C to 50°C
Six-Speed Specification
High Sierra Group
CD-ROM XA
Mode 1 and 2
Video CD
CD-DA
CD-Plus
MPC III
Multisession Photo CD
Single Session Photo CD
540 MB (Mode 1),
630 MB (Mode 2)
Data disc: ISO 9660
file format
Two channels
Software volume control
1.63 in. (41.5 mm)
5.75 in. (146.0 mm)
7.91 in. (201 mm)
1.8 lb. (900 grams)
5°C to 45°C