Appendix B System Board Jumpers; Jumper Locations - NEC POWERMATE V Service Manual

Appendix B
System Board Jumpers
This appendix provides jumper setting information for configuring the system for a
particular system requirement. Situations that require changing the jumper settings include
the following:
T
upgrading the processor
T
clearing a password
T
clearing CMOS.

JUMPER LOCATIONS

Figure B-1 shows the location of the system board jumpers.
Processor
Voltage
CAUTION: Jumpers are set correctly at the
factory for the shipped configuration. If the
system requires a jumper change, change only the
jumper setting for that condition. Otherwise,
keep the jumpers at their factory settings.
BIOS Recovery
Password Clear
Figure B-1 System Board Jumper Locations
Processor/Bus Speed
ATCLK