NEC POWERMATE V Service Manual page 109

4. Identify the slot for the device being installed.
5. Remove the blank panel from the selected slot by pressing the panel tabs from
inside the front panel and pushing the blank panel out (see Figure 3-38).
Figure 3-38 Locating the Blank Panel Tabs
Remove the slot cover from the selected slot by removing the two slot cover
6.
screws on the front of the system (see Figure 3-39).
Figure 3-39 Locating the Slot Cover
Install the minitower 5 1/4-inch device (see Installing the Minitower 5 1/4-Inch
7.
Device).
Blank Panel
Tabs
* Multimedia systems come with a CD-
ROM reader in the top 5 1/4-inch slot.
Option Installation
Front Panel
(inside view)
Slot Covers*
3-37