Legend Bar; Setup Key Functions - NEC POWERMATE V Service Manual

T
Security
fixed disk boot sector, and the Backup and Virus-check reminders.
T
Power Use this menu to configure Power Management features.
T
Boot Use this menu to select the boot device (diskette drive, CD-ROM reader,
or hard drive)
T
Exit Exits the Setup utility with options to save or discard changes, load
defaults, or load previous values.
To select an option from the menu bar, use the left and right arrow keys.
See "Exiting Setup" in this section for a description on exiting the Main Menu.

Legend Bar

Use the keys listed in the legend bar on the bottom of the Setup menu to make the
selections or exit the current menu. Table 2-1 describes the legend keys and their alternates.
Key
F1 or Alt-H
Esc
or arrow keys
or arrow keys
Tab or Shift-Tab
Home or End
Page Up or Page Down
- (minus)
+ (plus)
F9
F10
Enter
Alt-R
Use this menu to set User and Supervisor Passwords, diskette access,
Table 2-1 Setup Key Functions
Function
Displays General Help window (described later in this section).
Exits the menu.
Selects a different menu.
Moves cursor up and down.
Cycles cursor up and down.
Moves cursor to top or bottom of window.
Moves cursor to next or previous page.
Selects the Previous Value for the field.
Selects the Next Value for the field.
Loads the Default Configuration values for this menu.
Loads the Previous Configuration values for this menu.
Executes a command or selects submenu.
Refreshes screen.
Setup and Operation 2-15