Assembling The Microphone Holder; Connecting The Microphone - NEC POWERMATE V Service Manual

2-4 Setup and Operation
5. Assemble and connect the microphone (multimedia systems only) as follows.
T
Slide the microphone holder into the slot in the microphone stand as far as it
will go (see Figure 2-4).
T
Slide the microphone cable and microphone into the holder. Adjust the
microphone by pivoting it up and down and side to side.
Microphone
Cable
T
Plug the microphone into the microphone in jack at the rear of the system (see
Figure 2-5).
Microphone
Holder
Figure 2-4 Assembling the Microphone Holder
Line Out Jack
Figure 2-5 Connecting the Microphone
Microphone
Microphone
Stand
Microphone In
Jack
Line In Jack