Gb Hard Disk Drive Jumper Settings - NEC POWERMATE V Service Manual

Hard Disk Drive Specifications and Jumper Settings C-5
1.2- AND 1.6-GB HARD DISK DRIVE JUMPER SETTINGS
The Conner 1.2- and 1.6-GB hard drives uses jumper block JP4 at the front of the drive to
configure the drive for a master or slave device. Jumper block JP4 has two user-selectable
jumper settings: C/D (master/slave select) and CS (cable select). The remainder of the
jumpers are reserved for factory use. See Figure C-3 for the user selectable jumpers and
their settings.
CS
C/D
Master (factory default) Slave Cable Select
C/D CS C/D CS C/D CS
Figure C-3 Conner 1.2- and 1-6 GB Jumper Settings