Integrated Peripherals Parameters - NEC POWERMATE V Service Manual

2-22 Setup and Operation
Use the legend keys to make the selections and exit to the Main Menu. Use Table 2-8 to
configure the peripherals.
Table 2-8 Integrated Peripherals Parameters
Feature
COM A Port
COM B Port
COM B Mode
LPT Port
LPT Mode
ECP Channel
Diskette Controller
Local Bus IDE
Controller
PS/2 Mouse
On-board Stereo
Sound
On-board Surround
Sound
NOTE: A Supervisor password might be
required to select parameters from the Integrated
Peripherals menu.
Options
Disabled
User-selectable settings
Auto
Serial Port
IrDA (default)
Disabled
378, IRQ 7 (default)
User-selectable settings
Auto
Output only (default)
Bi-directional
ECP
DMA 0
DMA 1
DMA 3
Enabled (default)
Disabled
Both (default)
Primary
Disabled
Enabled (default)
Disabled
Enabled (default)
Disabled
Enabled (default)
Disabled
Description
Selects a unique address and interrupt request
for the listed COM ports. Auto selects the next
available combination.
Factory settings:
COM A port default: 3F8, IRQ 4
COM B port default: 2F8, IRQ 3
"Serial Port" enables COM B port as a serial
port. "IrDA" enables COM B port for IrDA
transfers.
Selects a unique address and interrupt request
for the LPT port. Auto selects the next available
combination.
Enables parallel port to function normally
(Output only), bidirectional, or in an enhanced
capabilities port (ECP) mode. Check the printer
documentation to set the correct LPT mode for
your printer.
Available when ECP is selected for the LPT
mode.
Enables the on-board diskette drive controller.
Enables the on-board IDE controllers. "Both"
enables the primary (fast) and secondary
(standard) channels. The "Primary" option
enables only the primary (fast) channel
Enables/disables the PS/2-style mouse.
Enables/disables integrated audio in multimedia
systems.
Enables/disables surround sound in multimedia
systems.