Speaker Assembly Removal - NEC POWERMATE V Service Manual

Tabs
Figure 6-17 Removing the Card Guide/Fan Bracket Assembly

Speaker Assembly Removal

Remove the speaker per Figure 6-18 and the following steps.
1. Remove the system unit cover as previously described.
2. Unplug the speaker from its connector on the system board (see Appendix A for
connector assignments).
3. Slide the speaker out from the speaker tabs.
Speaker
4. Remove the speaker from the system unit.
(Front View)
Figure 6-18 Speaker
Minitower Repair
Card Guide/
Fan Bracket
(Inside View)
6-13