Expansion Board Removal; Front Panel Removal; Blank Panel And Metal Slot Cover Removal - NEC POWERMATE PROFESSIONAL 9000 Service Manual

Expansion Board Removal

To remove an expansion board, see "Expansion Boards" in Section 3.

Front Panel Removal

Remove the front panel as follows.
Four metal tabs hold the front panel to the front of the system unit. Remove the
1.
front panel by evenly pulling it away from the system unit to release the tabs.

Blank Panel and Metal Slot Cover Removal

Remove the blank panel from the front panel and the metal slot cover from the chassis as
follows.
1. Remove the front panel as previously described.
Press the tabs on the back side of the plastic blank panel together slightly and pull
2.
the panel free from the metal slot cover (see Figure 5-2). Set the panel aside.
Figure 5-1 Removing the Front Panel
Repair 5-3