Adding External Options; Parallel Printer - NEC POWERMATE V Service Manual

ADDING EXTERNAL OPTIONS

This subsection includes installation procedures for a parallel printer and serial devices.
Procedures for connecting the microphone, speakers, and fax/modem are included in
Section 2, Setup and Operation.

Parallel Printer

Connect a parallel printer to the system as follows.
1. Turn off power to the system and printer.
2. Connect the printer cable to the printer port on the rear of the system unit (see
Figure 3-44 or Figure 3-45).
Secure the cable with the screws provided.
3.
4. Connect the other end to the printer.
Figure 3-44 Connecting a Printer Cable to the Desktop
NOTE: Before connecting a printer to the
system, be sure the printer is set up correctly.
Follow the setup instructions that come with the
printer.
Option Installation
Printer Port
Printer Cable
Screws
3-41