Rs-232C Device Connection - NEC POWERMATE V Service Manual

3-42 Option Installation
Figure 3-45 Connecting a Printer Cable to the Minitower

RS-232C Device Connection

1. Turn off power to the system and to the serial device.
2. Connect one end of the serial cable to one of the two serial ports on the rear of
the computer (see Figure 3-46 or Figure 3-47).
3. Secure the cable with the screws provided.
NOTE: Before connecting a serial device to the
system, be sure the serial device is set up
correctly. Follow the setup instructions that
come with the option.
Printer Port
Printer Cable
Screws