Expansion Boards - NEC POWERMATE V Service Manual

3-6 Option Installation
4. From the rear of the system, grasp the sides and slide the cover about an inch
away from the front panel (see Figure 3-4).
Lift the cover up and away from the system unit.
5.
Reinstall the cover by reversing steps 1 through 5, above.
6.
Be sure that the cover tabs on the sides of the cover align inside the frame of the
unit when replacing the cover.

EXPANSION BOARDS

The computer supports ISA Plug and Play expansion boards. Plug and Play expansion
boards allow installing a board in an expansion slot without changing the hardware settings.
There are no system resource conflicts to resolve. Plug and Play automatically configures
the board for the system.
Industry-standard 8- 16-bit, ISA and 32-bit PCI expansion boards are supported in the
system unit. ISA expansion boards can either be Plug and Play or non-Plug and Play boards.
NOTE: The cover fits tightly. Press the front
edge of the cover to release it from the front
panel. Also try pressing against the rear panel to
slide the cover one inch away from the front
panel.
Figure 3-4 Releasing the Cover