Cabling a Diskette Drive
Connect the diskette drive signal cable connector to the signal connector on the
1.
diskette drive (see Figure 3-26).
Locate an available power connector.
2.
Connect the power cable to the power connector on the device.
3.
Figure 3-26 Connecting 1.2-MB Diskette Drive Cables
Desktop Storage Device Installation
The following subsections describe how to install 3 1/2-inch and 5 1/4-inch drives. The
installation procedures include:
T
removing the desktop 3 1/2-inch drive bracket
T
installing a desktop 3 1/2-inch drive
T
removing the desktop front panel
T
installing a desktop 5 1/4-inch device
T
replacing the desktop front panel
T
replacing the desktop 3 1/2- inch drive bracket.
Diskette Drive
Signal Cable
Connector
Power
Cable
Option Installation
Red Edge
3-27