NEC POWERMATE V Service Manual page 146

2. Locate the SIMM sockets (see Figure 6-4).
SIMM
Socket 4
SIMM
Socket 3
SIMM
Socket 2
SIMM
Socket 1
Figure 6-4 System Board Upgrade SIMM Sockets
Press the metal clips at the outer edges of the socket away from the SIMM.
3.
Push the SIMM away from the locking tabs (tilt the SIMM forward) and remove
4.
it from the socket (see Figure 6-5).
5. Repeat steps 3 and 4 for each SIMM being removed.
NOTE: For information on installing SIMM
sticks, see Section 3, "Options".
Clips
Figure 6-5 Removing a SIMM
Minitower Repair 6-5