Cd-Rom Reader Jumper Settings; Nec 24X Cd-Rom Reader; Nec 24X Cd-Rom Reader Jumpers - NEC POWERMATE PROFESSIONAL 9000 Service Manual

B-10 Jumper Settings
T
SCSI ID=4, pins 5 - 6 jumpered
T
SCSI ID=5, pins 1 - 2 and 5 - 6 jumpered
T
SCSI ID=6, pins 3 - 4 and 5 - 6 jumpered
T
SCSI ID=7, pins 1 - 2, 3 - 4, and 5 - 6 jumpered
T
SCSI ID=8, pins 7 - 8 jumpered
T
SCSI ID=9, pins 7 - 8 and 1 - 2 jumpered
T
SCSI ID=10, pins 7 - 8 and 3 - 4 jumpered
T
SCSI ID=11, pins 7 - 8, 1 - 2, and 3 - 4 jumpered
T
SCSI ID=12, pins 7 - 8 and 5 - 6 jumpered
T
SCSI ID=13, pins 7 - 8, 5 - 6, and 1 - 2 jumpered
T
SCSI ID=14, pins 7 - 8, 5 - 6, and 3 - 4 jumpered
T
SCSI ID=15, pins 7 - 8, 5 - 6, 1 - 2, and 3 - 4 jumpered

CD-ROM READER JUMPER SETTINGS

CD-ROM reader jumper settings vary according to the particular model in the system and
how that model is configured.

NEC 24X CD-ROM Reader

The NEC 16X CD-ROM reader CDR-1800A/BR uses a three-position jumper block to
configure the master/slave and cable select options. The user selectable jumper is shown in
the following figure and its settings are as follows.
Figure B-3 NEC 24X CD-ROM Reader Jumpers