Error Messages And Their Meanings - Ricoh Aficio 2232C User Manual

Troubleshooting

Error Messages and Their Meanings

If there is an error, one of the following messages may appear on the display. If
other message appears, follow the message.
Message
Put original back, check it and
press [Start].
Error occurred, and transmis-
sion was canceled.
5
Cannot detect original size.
Place original again, then
press [Start].
L
Call Service
Functional problems with fac-
simile. Please call service.
Memory is full. Cannot scan
more. Transmitting only scanned
pages.
Following output tray is full.
Remove paper.
Cannot scan to send fax message
as scanner is in use for other
function.
Updating the destination list.
Please wait. Selected destina-
tions or function settings have
been cleared. Please re-select
after the update finishes.
76
Causes and solutions
Original jammed during Memory Transmis-
sion. Place originals that have not been
scanned again.
A document jam occurred during Immediate
Transmission. Press [OK], and then resend the
pages that have not been sent.
An error occurred during Immediate Trans-
mission. Press [OK], and then resend the origi-
nal.
Note
❒ There may be a problem with the machine
or the telephone line (for example noise or
cross talk). If the error reoccurs frequently,
contact your service representative.
The machine failed to detect the size of the
original. Place originals again, and then press
the { { { { Start} } } } key.
There is a problem with the fax. Record the
code number shown in the display and contact
your service representative. The copy function
will still work normally.
If you press [Exit], the machine returns to
standby mode and starts transmitting the pag-
es that have been stored.
The paper output tray is full. Remove paper
from the tray indicated in the display.
The Copy or Document Server function is in
use. To cancel the job in process, do the follow-
ing, and then try faxing again.
Press [Exit], and then press the { { { { Copy} } } } or { { { { Doc-
ument Server} } } } key. Next press the { { { { Clear/Stop} } } }
key. When the message "
pressed. Stop copying?
"
[Stop] key was pressed. Stop
" appears, press [Stop].
storing?
Wait with the main power switch on. The ma-
chine will enter standby mode after it exits
from RDS mode.
[Stop] key was
" or