Ricoh Aficio 2232C User Manual page 467

❒ Staple printing will be canceled under the following conditions:
• If the number of staple jobs exceeds maximum. For information about the
maximum number, see "Specifications", General Settings Guide.
• If a paper size that cannot be stapled is selected. For information about pa-
per sizes that can be stapled, see "Specifications", General Settings Guide.
• If positions other than those fixed for stapling are specified.
• If there are inconsistencies between the orientation in duplex mode and the
staple position.
• If paper sizes are mixed when a different paper size is specified during a
print job.
• When staples have run out.
• When feeding paper from the bypass tray.
• When staples have run out and Auto Continue is set, printing will continue
without stapling after the message has been displayed.
❒ When using the optional booklet finisher to select [2 at Center], the print job
will be canceled if the staples run out.
❒ Paper sizes that can be stapled when using the Mixed Size mode are as fol-
lows (enable with the optional 2250 finisher):
• A3 L and A4 K
• B4 L and B5 K
• 11" × 17"L and 8 1 /2" × 11"K
❒ When stapling along the fold of a booklet using Booklet Finisher, output is de-
livered to the lower tray.
Staple
6
57