Placing Originals - Ricoh Aficio 2232C User Manual

Placing Originals

You can place the originals either in
the optional ADF or on the exposure
glass. Some types of originals are un-
suitable for the ADF, so they must be
placed on the exposure glass.
Which way you place the original de-
pends on its size and whether you are
using the ADF or the exposure glass.
See p.19 "Original sizes difficult to
detect".
❖ ❖ ❖ ❖ How to place A4, B4 JIS (Japanese
Industrial Standard), A3, 8
"× × × × 14", and 11"× × × × 17" size originals
1
8 /
2
Original
Exposure glass
*1
*2
❖ ❖ ❖ ❖ How to place A5 and B5 JIS size
originals
Where original is placed
Original
Exposure glass
*2
*1
"× × × × 11",
1
/
2
Where original is placed
The ADF
The ADF
Note
❒ When you place originals as
shown in the above illustrations,
the fax header will be printed on
received faxes at the destination as
follows:
• *1 On the top of the fax
• *2 On the left side of the fax
Limitation
❒ If you place A5 size documents on
the exposure glass, they will not be
d e te c t ed . A 5 siz e do c u m e nt s
placed in the ADF are sent. See
p.19 "Original sizes difficult to de-
tect".
Note
❒ When sending a fax, the image
output at the other end depends on
the size and orientation of paper
used in the receiver's terminal. If
the receiver does not use paper of
the same size and orientation as
that of the original, the fax image
may be reduced in size, trimmed at
both edges, or divided into two or
more sheets. When sending an im-
portant original, we recommend
you ask the receiver about the size
and orientation of the paper used
in their terminal.
❒ When sending an original of irreg-
ular (i.e. custom) size or part of a
large original, you can specify the
scan area precisely. See p.16 "Set-
ting a Scan Area".
Placing Originals
2
13