G G G G
Make sure that following mes-
sage appears on the display, and
then press [Start Printing].
Fuser Adjustment Sheet II is print-
ing. See p.134 "Checking the Fuser
Adjustment Sheet".
H H H H
Compare the sample with the
printed pattern box in the printed
Fuser Adjustment Sheet II. Speci-
fy which square in the box match-
es the sample.
If you specify "0", setting is fin-
ished and the display that ap-
peared in step returns.
If you specify "-1" or "+1", the fol-
lowing display appears.
Adjusting the Colour Registration
Press [Start Printing]. An adjusted
Fuser Adjustment Sheet II is print-
ed and the display that appeared
H
in Step
reappears. Keep adjust-
ing until the printed pattern looks
the same as the printed pattern,
and then specify "0".
I I I I
After making all the settings,
press the { { { { User Tools/Counter} } } } key.
The initial display is shown.
5
133