Ricoh Aficio 2232C User Manual page 792

General settings guide

Hide thumbs Also See for Aficio 2232C:

Table of Contents

❒ There may be a difference in the size of the image when it is printed at the des-

❒ If you place an original larger than A3, 11"×17" on the exposure glass, only an

A3, 11"×17" area is scanned.

❒ Even if an original is correctly placed on the exposure glass or in the ADF, a

margin of 3 mm (0.1") around each edge of the original may not be sent.

❒ If the receiver uses paper of a smaller width than the original, the image will

be reduced to fit that paper. See p.75 "Auto Reduce".

❒ The machine detects paper sizes in the following ways:

• When you place an original in the ADF, an original wider than about 264

mm (10.4") is scanned as A3, 11"×17" size.

An original narrower than about 230 mm (9.1") will be sent as 8

scanned as B4 JIS.

Originals up to 1,200 mm (47.2") in length can be scanned.

• Refer to the table below for sizes the machine can detect when you place

an original on the exposure glass. Because the machine scans non-standard

size documents in a standard size, part of the image may be truncated de-

pending on the length of the document. For details about how to set non-

standard size documents, see p.16 "Setting a Scan Area", Facsimile Refer-

ence <Basic Features>.

❖ ❖ ❖ ❖ Metric Version

"×14" size, and an original narrower than about 264 mm (10.4") is

–approx. 249 mm approx. 249 mm–

approx. 274 mm–

approx. 274 mm

approx. 316 mm

approx. 316 mm–

Chapters

Table of Contents

Aficio 2238c