Ricoh Aficio 2232C User Manual page 305

❖ ❖ ❖ ❖ Edit
Problem
When using the Double
Copies function, parts of
the original image are not
copied.
When using the Border,
Centre, or Centre/Border
function, parts of the origi-
nal image are not copied.
When using the Margin
Adjustment function, parts
of the original image are
not copied.
When using the Image Re-
peat function, the original
image is not copied repeat-
edly.
❖ ❖ ❖ ❖ Stamp
Problem
The stamp position is
wrong.
Causes
The original and copy pa-
per combination is not cor-
rect.
You set a wide erased mar-
gin.
Originals are not scanned
correctly.
You set a wide erased mar-
gin.
There is a lack of margin
space on the opposite side
of the binding position.
You selected copy paper of
the same size as the origi-
nals, or you did not select a
proper reproduction ratio.
Causes
The paper orientation is
wrong.
If You Cannot Make Copies As You Want
Solutions
Select A3L for A4 K originals and
A4 for A5 originals. See p.64 "Dou-
ble Copies".
Make the margin width narrower.
You can adjust it between 2-99 mm.
See "Erase Border Width" and
"Erase Centre Width" in p.117
1
"Edit / ".
2
Place originals correctly.
Place originals correctly.
Set a narrower margin with User
Tools. You can set the width be-
tween 0–30 mm (0"–1.2"). See p.117
"Front Margin: Left/Right", p.117
"Front Margin: Top/Bottom", p.117
"Back Margin: Left/Right", and
p.117 "Back Margin: Top/Bottom".
Select copy paper of a larger size
than the originals.
Select a proper reproduction ratio.
Solutions
Check the paper orientation and
stamp position.
4
99