Ricoh Aficio 2232C User Manual page 448

Troubleshooting
Problem
No transmission
when using 1394
interface connec-
tion
4
When connecting
the machine using
USB 2.0, the first
page of a print job
that contains a
large volume of
data is printed,
but the remaining
pages are not.
Black areas and
lines are printed
with an unnatural
hue.
Color documents
are printed in
black and white.
Solid areas, lines,
or text are shiny or
glossy when
printed as a mix-
ture of cyan, ma-
genta, yellow.
38
Check using the following procedure:
A
Confirm the IEEE 1394 interface cable is connected securely.
B
Restart the computer.
If the error occurs even after executing the above operation, proceed to
the following steps.
C
Unplug the IEEE 1394 interface cable connected to the computer.
D
Run the utility tool for the IEEE 1394 interface board, which is stored in
the following path on the CD-ROM "Printer Drivers and Utilities":
\UTILITY\1394\
Reference
For more information about using the utility tool for IEEE 1394, see
the README file in the same directory on the CD-ROM.
E
Restart the computer.
Check that USB Printing Support is installed on your computer.
Reference
See "Installing the Printer Driver Using USB", Printer Reference 1.
• PCL 5c/PostScript 3
Select [CMY+K] for Gray Reproduction in the printer driver's [Advanced]
dialog box under the [Print Quality] tab.
• RPCS
Select [CMY+K] for Gray Reproduction under the [Image Adjustments] tab
in the printer driver's [Change User Settings...] dialog box.
The printer driver is not set up for color printing.
• PCL 5c/PostScript 3
Select [Color] for the Color/Black and White under the printer driver's
[Setup] tab.
• RPCS
Select [Color] for the Color/Black and White under the printer driver's
[Print Settings] tab.
For details, see the printer driver Help.
• PCL 5c/PostScript 3
Select [K (Black)] for Gray Reproduction in the printer driver's [Ad-
vanced] dialog box under the [Print Quality] tab.
• RPCS
Select [K (Black)] for Gray Reproduction under the [Image Adjustments]
tab in the printer driver's [Change User Settings...] dialog box.
Causes and Solutions