Paper Tray; Programming/ Changing Special Senders - Ricoh Aficio 2232C User Manual

Key Operator Setting
Reception Reverse Printing
Use this function to print the pages in
reverse order. See p.100 "Reverse Or-
der Printing".

Paper Tray

Use this function to print documents
received from programmed senders
(Special Senders) and the documents
from other senders on different types
of paper.
For example, if blue paper is in Tray 1
and white paper is in Tray 2, the ma-
chine prints the documents from Spe-
cial Senders on the blue paper and
prints the documents from other
senders on the white paper, making it
easy for you to separate the two.
If you do not program any Special
Senders, the machine outputs docu-
ments received from all senders using
the default paper tray.
Limitation
❒ For Polling Reception and Free
Polling, you cannot select the pa-
per tray.
9
Note
❒ If the machine receives a message
that has a different size from the
paper in the specified tray, the ma-
chine prints it after splitting it or
minimizing its size. See p.100
"Page Separation and Length Re-
duction".
❒ Selection of the bypass tray ena-
bles you to specify the paper size in
"Scan Area".
168

Programming/ Changing Special Senders

A A A A
Press the { { { { User Tools/Counter} } } } key.
B B B B
Press [Facsimile Features].
C C C C
Press [Key Operator Tools].
D D D D
Press [Program Special Sender].
E E E E
Select the destination to program
or change.
When programming a new Special
Sender, press [*Not Programed].
F F F F
Enter a destination name, and
then press [OK].
Enter a destination name using
Own Name or Own Fax Number.
Reference
"Entering Text", General Set-
tings Guide
G G G G
Press [Full agreement] or [Partial
agreement].