Other Transmission Features
Manual Dial
The external telephone is required.
Pick up the handset of the external
telephone and dial. When the line is
connected and you hear a high-
pitched tone, press the { { { { Start} } } } key to
send your fax message. If, on the oth-
er hand, you hear a voice at the other
end, continue conversation as nor-
mal.
Limitation
4
❒ This function is unavailable for the
optional extra G3 interface unit.
❒ If Transmission Result Report (Im-
mediate Transmission) is printed,
the result of a transmission with
Manual Dial is not mentioned in
the report.
A A A A
Place the original, and then select
the scan settings you require.
Reference
p.13 "Placing Originals", Fac-
simile Reference <Basic Features>
p.30 "Scan Settings", Facsimile
Reference <Basic Features>
B B B B
Pick up the external telephone.
You will hear a tone.
C C C C
Dial.
The machine immediately dials the
destination.
58
Note
❒ If you make a mistake, replace
the external telephone, and then
try again from step
D D D D
When the line is connected and
you hear a high-pitched tone,
press the { { { { Start} } } } key to send your
fax message.
The transmission starts.
Note
❒ If you hear a voice, tell the re-
ceiver that you want to send
them a fax message (ask them to
switch to facsimile mode).
E E E E
Replace the handset of the exter-
nal telephone.
After transmission, the standby
display appears.
Note
❒ If you want to cancel a transmis-
sion, press the { { { { Clear/Stop} } } } key,
and then remove the originals.
B
.