Copying
Interrupt Copy
Use this function to interrupt a long
copy job to make urgently needed
copies.
Limitation
2
❒ You cannot use Interrupt Copy
whe n fax o rig inals are being
scanned.
A A A A
Press the { { { { Interrupt} } } } key.
The Interrupt indicator lights.
When scanning is interrupted
A Remove the originals that were
being copied, and then place
the originals you want to copy.
B Press the { { { { Start} } } } key.
Copying starts.
C When copying is complete, re-
move the originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator turns
off.
E When the display prompts you
to do so, place the former set of
originals again.
F Press the { { { { Start} } } } key.
Note
❒ The previous copy job's set-
tings are restored and the
machine continues copying
from where it left off.
20
When the machine continues
copying
A Place the originals you want to
copy.
B Press the { { { { Start} } } } key.
The machine stops the previous
job and starts copying the new
originals.
C When copying is complete, re-
move originals and copies.
D Press the { { { { Interrupt} } } } key again.
The Interrupt indicator goes
out.
The previous copy job's settings
are restored and the machine
continues copying from where
it left off.