Simplifying the Operation
Using a Program
Note
❒ Using the program causes the pre-
vious settings to be cleared.
A A A A
Make sure that the machine is in
facsimile mode and the standby
display is shown.
Note
❒ If the standby display is not
shown, press the { { { { Facsimile} } } }
key.
B B B B
Place the original.
Note
❒ If you have no programmed
destinations or scan settings as
programs, enter the fax number
of the destination and select the
scan settings you require.
C C C C
7
Press the { { { { Program} } } } key.
D D D D
Select the program number you
registered.
The standby display appears.
T h e n , t h e p r o g r a m m e d f a x
number is shown. Transmission
Mode is selected.
130
E E E E
Press the { { { { Start} } } } key.
The fax number and specified time
are shown on the display, and the
machine starts to scan the original.
The registered program will start.