Ricoh Aficio 2232C User Manual page 1065

Message
Cannot find rprinter (<print server name>/
<printer number>)
Change IP address from DHCP Server.
child process exec error! (process name)
Connected DHCP Server (<DHCP server ad-
dress>).
connection from <IP address>
Could not attach to PServer <print server
name>
Could not attach to FileServer <error code>
Current Interface Speed:xxxMbps
Current IP address <current IP address>
Current IPX address <IPX address>
DHCP lease time expired.
DHCP server not found.
dhcpcd start.
Duplicate IP=<IP address>(from <MAC ad-
dress>).
Established SPX Connection with PServer,
(RPSocket=<socket number>, connID =<con-
nection ID>)
exiting
Exit pserver
Causes and solutions
Check the printer number registered in the
print server.
The IP address changes when DHCP LEASE is
renewed. To always assign the same IP ad-
dress, set a static IP address to the DHCP serv-
er.
The network service failed to start. Turn the
printer off and then on. If this does not work,
contact your service or sales representatives.
The IP address was successfully received from
the DHCP server.
Logged on from the host <IP address>
When using a remote printer: Cannot connect
to the print server. The print server is rejecting
the connection for some reason. Check the
print server settings.
When using a remote printer: Cannot connect
to the file server. The file server is rejecting the
connection for some reason. Check the file
server settings.
The speed of the network (10 Mbps or 100 Mb-
ps)
The IP address <current IP address> was re-
ceived from the DHCP server.
The current IPX address
DHCP lease time has expired. The printer tries
to locate the DHCP server again. The IP ad-
dress used till now becomes invalid.
The DHCP server cannot be found. Make sure
the DHCP server is running on the network.
A dhcpcd (DHCP client server) has started.
The same IP address is used. Every IP address
must be unique. Check the address of the de-
vice indicated in <MAC address>.
(In remote printer mode) A connection with
the print server has been established.
lpd service has ended and the system is clos-
ing down.
(In print server mode) Exits the print server
because necessary print server settings have
not been made.
Message List
9
131