d Adding Staples
d
d
d
Important
❒ Stapling failures or jams may occur if you use a staple cartridge other than
that recommended.
Reference
For details about the type of finisher, see p.17 "External Options".
2 Tray Finisher
1. Open the front cover
of the finisher.
5. Push in the new cartridge
until it clicks.
2. Hold the green lever,
and then gently pull
out the cartridge.
6. Gently push down the
upper unit.
3. Hold both sides of the
cartridge, and then
raise the upper unit.
7. Pull out the ribbon.
d Adding Staples
4. Remove the empty
refill in the direction
of the arrow.
8. Hold the green lever
while pushing in the
cartridge until it clicks.
9. Close the front cover
of the finisher.
AAE009S
5
125