Ricoh Aficio 2232C User Manual page 973

Interface Settings/IEEE 1394
Preparation
You must install the optional IEEE
1394 interface board in the ma-
chine.
❖ ❖ ❖ ❖ IP Address
When you connect the machine to
a network using the IEEE 1394 in-
terface, you must configure the IP
address and subnet mask.
• Auto-Obtain (DHCP)
• Specify
When you select [Specify], enter
the [IP Address] and [Sub-net
Mask] as "xxx.xxx.xxx.xxx"("x"
indicates a number).
• IP Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000
Note
❒ Default: Auto-Obtain (DHCP)
❒ If you use the interface for Eth-
ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made carefully. See
p.114 "Using DHCP"
❒ When you use the IEEE 1394 in-
terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the [Sub-
net Mask].
❒ The physical address (MAC ad-
dress) also appears.
User Tools Menu (System Settings)
❖ ❖ ❖ ❖ IP over 1394
When you use the IP over 1394
function of the IEEE 1394 interface
to connect the machine to the net-
work, or you print from computer
with the IP over 1394 driver, you
must specify [Active]for [IP over
1394].
• Active
• Inactive
Limitation
❒ Printing with IP over 1394 is
p o s s i b l e u n d e r W i n d o w s
Me/XP and Windows Server
2003
Note
❒ Default: Active
❖ ❖ ❖ ❖ WINS Configuration
You can specify the WINS server
settings.
• ON
If [ON] is selected, specify the
[V V V V WINS Server] IP address as
"xxx.xxx.xxx.xxx" ("xxx" indi-
cates a number).
If DHCP is in use, specify the
[Scope ID].
• VWINS Server:000.000.000.000
• Scope ID
• OFF
Limitation
❒ Enter [Scope ID] using up to 31
alphanumeric characters.
Note
❒ Default: OFF
3
39