Removing An Ip Phone 2004 From Service - Nortel 1110 Fundamentals

130 Nortel IP Phone 2004
3
4

Removing an IP Phone 2004 from service

Procedure 24
Removing an IP Phone 2004 from service
Step
1
2
Copyright © 2003–2007, Nortel Networks
.
Follow Procedure 17 "Configuring the IP Phone 2004" (page
107) and Procedure 18 "Installing the IP Phone 2004 for the first time
using manual configuration" (page 110)
an IP Phone 2004 for the first time using DHCP" (page 118)
and configure the IP Phone 2004.
Enter the same TN and Node Number as the IP Phone 2004 you
replaced. The Call Server associates the new IP Phone 2004 with
the existing TN.
Action
Disconnect the IP Phone 2004 from the network or turn the power off.
The service to the PC is disconnected as well if the PC connects to
the IP Phone 2004.
If the IP Phone 2004 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
In LD 11, enter OUT at the TN prompt.
Nortel Communication Server 1000
IP Phones Fundamentals
NN43001-368 02.01 Standard
Release 5.0 7 December 2007
or Procedure 19 "Installing
—End—
—End—
to install